manualshive.com logo in svg

Carrier AquaForce 61XWHZE, Control Manual

Share
Download
Carrier AquaForce 61XWHZE Control Manual Download Page 13

13

4.7 - Other buttons

Button

Description

Save button:

 Press the button to save the modification.

Cancel button:

 Press the button to cancel the 

modification.

Log in button:

 Press the button to log in at specific 

access level.

Log off button:

 Press the button to log off.

Confirm  button:

  Press  the  button  to  confirm  the 

modification.

Cancel button:

 Press the button to cancel the 

modification.

Up button:

 Press the button to scroll up.

Down button:

 Press the button to scroll down.

Force button:

 Press the button to force the parameter.

Remove Force button:

 Press the button to remove 

the forced parameter.

Trending button:

 Press the button to display trends.

Refresh button:

 Press the button to refresh the view.

Zoom in button:

 Press the button to magnify the 

current view.

Zoom out button:

 Press the button to expand the 

current view.

Left button:

 Press the button to go to the left.

Rewind button:

 Press the button to go to the left faster 

than normal.

Right button:

 Press the button to go to the right.

Fast-forward button:

 Press the button to go the right 

faster than normal.

4.8 - Screen calibration

The purpose of screen calibration is to make sure that the software 

acts correctly upon pressing icons on the user interface.

To calibrate the screen

1.  Press and hold anywhere on the screen.
2.  The calibration process will start. 
3.  Please follow instructions displayed on the screen:

“Touch the target in (...) screen corner”

4.9 - Warning messages

Warning messages are used to inform the user that a problem 

occurred and the requested action cannot be completed successfully. 

Login failure

If the wrong password is provided, the following warning message 

will be displayed:

“The p

assword 

entered does not match any stored passwords

”

 

■

Press the 

Confirm

 button and type the correct password 

(see section 5.7).

4.10 - 

Saving modifications

In case a parameter has been changed, but not saved with the 

Save

 button, the following warning message will be displayed:

“Your recent changes haven’t been saved (...)”

 

■

Press the 

Confirm

 button to continue without saving the 

modification.

 

■

Press the 

Cancel

 button to come back to the current screen 

and then save the modification with the 

Save

 button.

4 - USER INTERFACE: OVERVIEW

Summary of Contents for AquaForce 61XWHZE





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands