ACA
SERIES
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
PC 131
Catalog No. 537-338
Printed in U.S.A.
Form 73ACA-1SI
Pg 1
1-03A
10-02
Replaces: New
Book
1
4
Tab
8a 10a
INSTALLATION
INSTRUCTIONS
This installation instruction is for 73ACA051T,
73ACA051B, 73ACA061T, 73ACA081T, and
73ACA101P air-conditioning units. Read entire
installation instructions before proceeding with
installation.
REQUIRED TOOLS
• Phillips screwdriver
• pencil
• level
• measuring tape
• drill
•
1
/
8
and
1
/
4
-in. drill bits
INSTALLATION
WIRING
The air conditioner is powered by plugging it into a
compatible wall outlet. The electrical outlet MUST
match the plug on the unit power cord. The unit name-
plate contains unit electrical data, unit ratings, and
identification numbers. Do not use a plug adapter or an
extension cord.
Check available power supply and resolve any wiring
problems before installing and operating the air condi-
tioner. If wiring is required, all wiring must comply
with all local and national electrical codes. All wiring
must be installed by a qualified electrician. If you have
any questions regarding the unit electrical data or wir-
ing, consult a qualified electrician before installation.
For your safety, this air conditioner is grounded
through the power cord plug when plugged into a
matching wall outlet.
WINDOW INSTALLATION
To install the room air conditioner in a window,
perform the following procedure.
1. Check contents of hardware kit. See Table 1. Make
sure all the items are in the plastic bag.
2. Determine which window will be used for installa-
tion. Make sure there is adequate clearance on the
inside and outside of the window. Ensure that the
power cord will reach the available socket without
an extension cord. A double-hung window type
must be used for the installation location.
TABLE 1 — HARDWARE CONTENTS
Electrical shock can cause injury or death. Do not
install unit or remove front grille with the power
cord plugged in. Be sure unit is unplugged before
performing any installation or maintenance.
Electrical shock can cause injury or death. Do not,
under any circumstances, cut, remove, or bypass the
grounding prong on the power plug.
ITEM
QTY
3
/
4
-in. locking screws
frame/sill
2
3
/
4
-in. screw sash
safety bracket
1
Sash safety bracket
1
1
/
2
-in. locking screws
frame/sash
2
The French section follows the English section in this manual.
Les instructions en français suivent celles en anglais.
The Spanish section follows the French section in this manual.
La sección en español aparece después de la sección en francés en
este manual.
