Carrier 40RU 25, Manual

Page: 17 / 40

17
Table 7 — Factory-Installed Nozzle and Distributor Data
a
NOTE(S):
a. Hot gas bypass applications require field-supplied auxiliary side connector.
UNIT COIL TYPE STD TXV QTY...PART NO. DISTRIBUTOR QTY...
PART NO.
FEEDER TUBES PER
DISTRIBUTOR b
QTY...SIZE (IN.)
b. Feeder tube size is 1/4 in. (6.35 mm).
NOZZLE QTY...PART NO.
40RUA*25 4 Row 2...BBIZE-8-GA 2...D196-18-3/16 18...3/16 2...G6
40RUA*28 4 Row 2...BBIZE-15-GA 2...1126 20...3/16 2...C15
40RUA*30 4 Row 2...BBIZE-15-GA 2...1126 24...3/16 2...C17
40RUQ*25 4 Row 2...BBIZE-12.5-GA 2...113-12-3/16 2-12...3/16 2...G8
Table 8 — Fitting Requirements
UNIT ACCESS HOLD NO. a
NOTE(S):
a. Fittings are listed on order from header or tee stub connection out to access hole in corner support post.
CONNECTION TYPE CIRCUIT FITTING REQUIRED b (in.)
b. See Fig. 8 for access hole location by number.
40RUA*25
1 Suction Lower
1-1/8 Street Elbow
1-1/8 Nipple, 7-5/8 L
1-1/8 Long Radius Elbow
2 Liquid Lower
5/8 Street Elbow
5/8 Nipple, 6-1/2 L
5/8 Long Radius Elbow
3 Liquid Upper
5/8 Street Elbow
5/8 Nipple, 9-1/2 L
5/8 Long Radius Elbow
4 Suction Upper
1-1/8 Nipple, 5-5/8 L
1-1/8 Long Radius Elbow
1-1/8 Nipple, 11 L
1-1/8 Long Radius Elbow
40RUQ*25
3 Suction Lower
1-1/8 Nipple, 3 L
1-1/8 Long Radius Elbow
5 Suction Lower
5/8 Nipple, 2-7/8 L
5/8 45° Elbow
5/8 Nipple, 1-5/8 L
5/8 Long Radius Elbow
6 Liquid Upper
5/8 Nipple, 2-7/8 L
5/8 45° Elbow
5/8 Nipple, 4-1/4 L
5/8 Long Radius Elbow
7 Suction Upper
1-1/8 Nipple, 5 L
1-1/8 45° Elbow
1-1/8 Nipple, 8-3/4 L
1-1/8 Long Radius Elbow
40RUS*25
4 Supply Lower
1-3/8 Long Radius Elbow
1-3/8 Nipple, 3-3/4 L
1-3/8 Long Radius Elbow
5 Return Lower
1-3/8 Long Radius Elbow
1-3/8 Nipple, 3-3/8 L
1-3/8 Long Radius Elbow
6 Return Upper
1-3/8 Long Radius Elbow
1-3/8 Nipple, 7 L
1-3/8 Long Radius Elbow
7 Supply Upper
1-3/8 Long Radius Elbow
1-3/8 Nipple, 11-3/4 L
1-1/8 Long Radius Elbow