![background image](http://html1.mh-extra.com/html/carrier/40mhh/40mhh_owners-manual_2561986011.webp)
40MHH: Owner’s Manual
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
11
SETTING THE TIMER
TIMER ON/OFF
TIMER ON
Fig. 14 — Setting the TIMER ON Setting
NOTE:
1. When setting the
TIMER ON
or
TIMER OFF,
the time increases by 30 minutes increments with each press, up to 10 hours. After 10 hours and up to
24, it increases in 1 hour increments. (For example, press 5 times to get 2.5h, and press 10 times to get 5h,) The timer reverts to 0.0 after 24.
2. Cancel either function by setting its timer to 0.0h.
TIMER ON and OFF
Fig. 15 — Timer ON and OFF
TIMER OFF setting
Press
TIMER
to initiate
the
ON
time sequence.
Press
Temp. UP or DOWN
multiple times to set the desired
time to turn on the unit.
Press
Temp. up or down
multiple
times to set the desired time to turn
off the unit.
Point remote towards the unit and
wait 1 second.
TIMER ON
activates.
Press
TIMER
to initiate the
OFF
time sequence.
Point remote towards the unit and
wait 1second.
TIMER OFF
activates.
ON
/O
FF
M OD
E
FA
N
SH
OR
T
CU
T
TIM
ER O
N
TIM
ER O
FF
TEM
P
SLE
EP
1
sec
ON
/O
FF
M OD
E
FA
N
SH
OR
T
CU
T
TIM
ER O
N
TIM
ER O
FF
TEM
P
SLE
EP
1
sec
x5
x10
TIMER
TIMER
TIMER ON & OFF setting
Current
time 1PM
2:00PM
3:00PM
4PM
5PM
6PM
Timer starts
Unit turns
ON
Unit turns
OFF
2.5 hours later
5 hours later
3:30PM
Example: If the current timer is 1:00PM,
to set the timer as above shown above,
the unit will turn on 2.5h later (3:30PM)
and then turn off at 6:00PM.
ON
/O
FF
M OD
E
FA
N
SH
OR
T
CU
T
TIM
ER O
N
TIM
ER O
FF
TEM
P
SLE
EP
ON
/O
FF
M OD
E
FA
N
SH
OR
T
CU
T
TIM
ER O
N
TIM
ER OF
F
TEM
P
SLE
EP
xn
Keep in mind that the time periods you set for both functions refer to hours after the current time.
TIMER
TIMER