background image

A Guide To Operating

Your VVT System

NOTE TO INSTALLER

This manual should be left with the equipment owner.

GENERAL

This manual will assist you in using your Carrier Comfort

System thermostat. There are 2 basic types of thermostats
that you may encounter. They are called the monitor ther-
mostat and the zone controller.

The monitor thermostat can be identified by the system

switches (FAN, HEAT, COOL) which are located along the
bottom edge of the front cover. The monitor thermostat can
be equipped with or without a timeclock. The timeclock dis-
play is located in the upper right corner of the monitor ther-
mostat. The monitor thermostat display is located in the up-
per left corner. The set point and programming buttons are
located around the display.

The zone controller does not have system switches or a

timeclock. The zone controller display is located in the up-
per left corner of the zone controller. The set point and pro-
gramming buttons are located around the display.

There are three typical operations you may perform on

your VVT (variable volume and temperature) system
thermostat:
• change set points for heating and cooling
• override the unoccupied schedule
• change occupancy schedules
NOTE: Your ability to perform these functions may be lim-
ited by the security access level function which is config-
ured by the installer. If ‘‘access denied’’ is shown on the dis-
play screen, you are not allowed to access that function.

The monitor thermostat and zone controller are part of a

VVT system. The VVT system allows a single-zone heating/
cooling unit to operate as a multiple-zone system. The con-
ditioned space is divided into zones. Each comfort zone is
monitored by a zone controller. The monitor thermostat moni-
tors the operation of its own zone and of each associated
zone controller and determines system operation from in-
formation received from each device that it controls.

Monitor Thermostat With Timeclock

Zone Controller

33CS

Carrier Comfort System

VVT

T

System

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Book 1

4

Tab

11a 13a

PC 111

Catalog No. 809-247

Printed in U.S.A.

Form VVT-2SO

Pg 1

10-95

Replaces: New

Summary of Contents for 33CS

Page 1: ...ns you may perform on your VVT variable volume and temperature system thermostat change set points for heating and cooling override the unoccupied schedule change occupancy schedules NOTE Your ability to perform these functions may be lim ited by the security access level function which is config ured by the installer If access denied is shown on the dis play screen you are not allowed to access t...

Page 2: ...een ALTERNATE DISPLAY By pressing both cooling or heat ing set point buttons simultaneously the alternate informa tion display is activated The monitor thermostat or zone controller will display the current zone temperature and then the time of day If the Alternate Display function has been configured to ON the monitor thermostat or zone controller will show more detailed zone information The disp...

Page 3: ...fy the screen 5 Configure the start time for category 2 option 1 When the select button is pressed from the start time screen the hours number will flash The hours are modified through the left set point buttons The AM PM modifier will au tomatically switch when scrolling through the times To change the minutes press the select button again The min utes numbers will flash Use the left set point bu...

Page 4: ...facturer reserves the right to discontinue or change at any time specifications or designs without notice and without incurring obligations Book 1 4 Tab 11a 13a PC 111 Catalog No 809 247 Printed in U S A Form VVT 2SO Pg 4 10 95 Replaces New ...

Reviews: