6
ASSEMBLY INSTRUCTIONS (CONT.)
8. Insert LEG BAR #6 into both LEGS as shown. Attach LEFT LEG #4 and RIGHT LEG #5 to each corner of
the table with 5/16” BOLT #9 and 5/16” FLAT WASHER #8.
9. Thread one LEG LEVELER #37 onto each LEG. Carefully turn table over.
10. Begin PLAYER ROD assembly by partially inserting PLAYER ROD into the appropriate hole in the SIDE PANEL.
11. Before continuing, refer to the diagrams below for correct rod orientation and player placement.
Note: You may
choose either color for home or visitor teams.
Hand tighten ALL bolts
before final tightening.
#6
#8
#5
#9
#4
#8
#9
#37
NOTE: Hole on end of rod indicates handle side.
