background image

14

gp

electric.com

GP-RV-80

GP-RV-95

GP-RV-160

GP-RV-80E

GP-RV-95E 

GP-RV-160E

Weekender SW

Weekender HD

Solar Elite

Solar Extreme

Diagram 5

RV Electrical Layout - Two AC Power Sources 

No Transfer Switch - Manual Switching

If the inverter supplies power to the AC panel which provides 

power to a converter, the resulting battery loop will quickly 

drain the batteries.
Disconnect the converter entirely from the system via a 

breaker or physically disconnecting the wires.
Usually the converter with circuit protection is rewired to 

connect to the utility power side of the system, if utility power 

is available.

Inverter

Battery

Solar 

Module

Loads

Charge

Controller

Converter/

Battery 

Charger

Shore Power Cable

In the absence of a transfer switch, the AC panel 

connection is physically unplugged from inverter 

and  plugged into utility power and vice versa.

Utility Power or 

Generator

Diagram is recommended wiring only. Compliance 

with governing electrical code is assumed.

In no event will Carmanah be liable to any party or 

for any direct, indirect, special or other consequential 

damages resulting from use of this diagram.

All positive conductors connected to 

the battery should be equipped with 

the circuit protection rated to the 

wire size used.

AC 

Panel

Summary of Contents for Go Power! GP-RV-160

















Reviews: