Carlyle 06ZCE1H3AA06013, Application Manual

Page: 8 / 24

8
Fig. 4 — Compressor Physical Data and Connections (06ZJ, Frame 3) (cont)
MEDIUM/HIGH TEMPERATURE SYSTEM
DESIGN CONSIDERATIONS
Refrigerants and Lubricants
APPROVED REFRIGERANTS
The 06Z screw compressor is specifically designed for use in
R-134a, R-1234ze, or R-513A systems.
APPROVED LUBRICANTS
The following lubricants are approved for use with 06Z screw
compressor:
• Carrier Material Spec PP47-13, PP47-14, PP47-32, or
PP47-34, Viscosity Grade ISO 220
The following lubricants are approved for use with 06Z screw
compressor with R-1234ze:
• Carrier Material Spec PP47-38, Viscosity Grade ISO 220
ASSEMBLY GREASE
On occasion, it may be necessary to use an assembly grease to re-
tain an O-ring within its groove. The following assembly grease is
approved for use with the 06Z screw compressor:
• Approved Lubricant — Parker Super-O-Lube
• Carrier Part Number — 19XL680001
TERMINAL PIN DIELECTRIC GREASE
Carlyle recommends that compressor motor terminal pins are
coated with dielectric grease (P/N 06TT660050) to reduce the ef-
fects of condensation that may form on the terminal pins.
CAUTION
EQUIPMENT DAMAGE HAZARD
Failure to follow this caution may result in damage to equip-
ment.
All POE oils are very hygroscopic (will readily pick up and re-
tain moisture from the air). Damaging acids can form if mois-
ture is present. Oil should only be used from a properly sealed
container.