P a g e |
86
15 Product information
© 2020 Carlson. All rights reserved.
This document may not be copied or reproduced in whole or in part, or transferred to any other media or language,
by any means, without the prior written permission of Carlson.
The publication of material within this document does not imply freedom from the patent rights of Carlson.
Trademarks
CARLSON and the symbol used in the CARLSON logo are registered trademarks of Carlson in the United Kingdom
and other countries. ‘Breaking new ground’ and names and designations of other Carlson products and technologies
are trademarks of Carlson or its subsidiaries.
All other brand names and product names used in this document are trade names, trademarks, or registered
trademarks of their respective owners.
Changes to Carlson products
Carlson reserves the right to improve, change or modify its products and documentation without incurring any
obligation to make changes to equipment previously sold or distributed.
Carlson has made considerable efforts to ensure the content of this document is correct at the date of publication
but makes no warranties or representations regarding the contact. Carlson excludes liability, howsoever arising, for
any inaccuracies in the document.
Warranty
Equipment requiring attention under warranty must be returned to your equipment supplier.
Unless otherwise specifically agreed in writing between you and Carlson, if you purchased the equipment from a
Carlson company, the warranty provisions contained in Carlson’s CONDITIONS OF SALE apply. You should
consult these conditions to find out the details of your warranty but, in summary, the main exclusions from the
warranty are if the equipment has been:
•
neglected, mishandled or inappropriately used, or
•
modified or altered in any way except with the prior written agreement of Carlson.
If you purchased the equipment from any other supplier, you should contact them to find out what repairs are
covered by their warranty.
Safety
It is essential that the FiX1 and all accessories are operated in accordance with the instructions in this user manual
and it is the responsibility of the user to ensure that, in the event of a failure of any part of the Carlson system, the
equipment remains safe.
In the case of equipment with powers or speeds capable of causing injury, it is essential that appropriate safety
protection measures are included in the machine usage. Further guidance can be found in
BS EN ISO 12100:2010
Safety of machinery – General principles for design – Risk assessment and risk reduction
.
Information to the equipment supplier/ installer
It is the equipment supplier’s responsibility to ensure that the user is made aware of any hazards involved in any
operations involving the FiX1 system, including those mentioned in Carlson product literature.
Summary of Contents for FiX1
Page 2: ......
