SAMBA
20 WATT WATERPROOF
HIGH POWER SPEAKER
OVERVIEW
STEREO PAIR FUNCTION
OPERATION
Thank you for purchasing the Samba 20 Watt Waterproof High Power
Speaker. Please read these instructions carefully for proper operation
and save for future reference.
Turning ON/OFF
Power on: Press the Power ON/OFF button for 1 second
until the white Power LED illuminates.
Power off: Press the Power ON/OFF button until the white
Power LED turns off.
Connecting with Bluetooth
To play audio from a Bluetooth device, you need to pair the
device with your speaker.
1. Power on the speaker. The blue Pairing LED blinks,
indicating the speaker is ready to connect with your
Bluetooth device.
2. Turn on Bluetooth mode on your device.
3. Select “Santana Samba” to initiate pairing, and the
speaker will automatically connect with your
Bluetooth device, indicated by the steady blue Pairing
LED. Some devices ask you to input the PIN “0000” as
the password.
Note: Generally, there is a 3 minute maximum to pair the
speaker with your Bluetooth device, otherwise retry steps 1
to 3 to pair again.
TF Card Mode
1. Insert a TF Card into the TF Card slot on the speaker.
2. Press the MODE button (M) to switch between Bluetooth
mode and Card mode. A voice prompt will indicate the
current mode.
AUX Mode
1. Insert a 3.5mm audio cable into the Aux Input on the
speaker.
2. Press the MODE button (M) to switch between Bluetooth
mode and AUX mode. A voice prompt will indicate the
current mode.
VOLUME (+)
CHARGING PORT
MIC
AUX INPUT
TF CARD
SLOT
Power
LED
Pairing
LED
Power ON/OFF
MFB
Play/Pause
Answer Call
End Call
MODE
VOLUME (–)
If you’ve purchased 2 Samba speakers, you can play music from
a stereo pair. Follow these instructions to take advantage of this
feature.
1. Disconnect Samba from all Bluetooth devices.
2. Power on both speakers.
3. Hold the MODE button for 2 seconds on one speaker, and
release when the voice prompt says “Speaker Searching”.
4. The speakers will connect to each other indicated by the
voice promt “Speakers Connected”. The Pairing LED on
one speaker will flash blue; it will be steady blue on the other
speaker.
5. Turn on the Bluetooth device, and select Santana Samba.
6. Once connected, both Pairing LEDs will be steady blue.
