Carlon SSMR Series, Installation And Operating Instructions, Page: 1 / 2

Model Size Normal Flow
Maximum
Flow*
625SSM / SSMR
⅝" X ½"
8 GPM ¼ - 20 GPM
6251SSM / SSMR
⅝" X ¾"
10 GPM ¼ - 20 GPM
750SSM / SSMR ¾" X ¾" 15 GPM ½ - 30 GPM
1000SSM / SSMR 1" 25 GPM
¾ - 50 GPM
150SSM / SSMR 1½" 50 GPM 2 -100 GPM
200SSM / SSMR 2" 80 GPM 2 - 160 GPM
05/15
Ph: (616) 842-0420
Fax: (616) 842-1265
Leaders in water measurement and control
Website: www.carlonmeter.com
E-mail: carlon@carlonmeter.com
Model SSM
®
& SSMR
®
METER CAPACITIES
Note:
All meter ends have straight threads, not tapered.
*For complete specifications, visit www.carlonmeter.com
Installation and
Operating Instructions
Grand Haven, MI 49417
Stainless Steel Series Water Meter
½" thru 2" sizes
1710 Eaton Drive
NSF / ANSI 372 Listed
METER MAINTENANCE
The only suggested maintenance is to annually remove the meter from the
water line and gently back flush the meter to remove particles that may have
been trapped by the strainer. Back flushing is running the water into the
meter from the outlet side instead of the normal flow direction. If some
unusual evidence of meter performance is observed during maintenance,
please contact the factory.
A broken tamperproof wire & seal indicates the meter has been
disassembled.
CARLON METER, INC. • PRODUCT WARRANTY
Carlon Meter, Inc.(hereinafter Carlon or “the company”) warrants products of its manufacture to be free of
defects in material or workmanship. Liability under this warranty extends for twelve (12) months from the
date of purchase. Liability is limited to repair or replacement of any failed product or assembly proven to be
defective in material or workmanship upon manufacturer’s examination. Removal and installation costs are
not included under this warranty. Manufacturer’s liability shall never exceed selling price of the meter or
assembly in question. Carlon disclaims all liability for damage its products caused as the result of improper
installation, maintenance, use or attempts to operate products beyond their intended functionality,
intentionally or otherwise. Carlon is not responsible for damages, injuries or expenses incurred through the
use of its products. The above warranty is in lieu of all other warranties, either expressed or implied. No
agent of the company is authorized to alter or otherwise revise this warranty.