SD2DUG software manual
11
2
Click on the pink circle on the right side of
3 ½ digit BCD
: all the 8 bits belonging
to the selected and following group will be marked in pink
Program 3 ½ digit BCD protocol with multiplexer
To program as 3 ½ digit BCD protocol, follow this procedure:
Step
Action
1
Click on
one
of the channels belonging to the first group to be programmed:
2
Click on the violet square on the right side of
3 ½ digit BCD
: all the 8 bits
belonging to the selected and following group will be marked in violet and A1 to
A4 output channels will be reserved for the multiplexer
A1 to A4 input channels are automatically set as split I/O.
