EM530/EM540 - User manual |23/11/2022 | CARLO GAVAZZI Controls SpA
21
Screensaver
If the SCREENSAVER function is enabled (default setting), after 5 minutes have elapsed since a button was pressed the unit will
display the home page if the screensaver type is “Home page” (default setting), or it shall activate the slideshow function, which
displays the selected pages on a rotating basis.
Notes:
In MID models the screensaver setting is “Homepage” and cannot be changed.
Page filter
The page filter makes it easier to use and browse the measurement pages. When you use the
buttons, the unit shall
only display the pages you are most interested in, which can be selected through the UCS software (S1 version) or is pre-defined
(O1 and M1 version)
Note:
to display all the pages without using the UCS software, you can disable the page filter from the SETTINGS MENU
(DISPLAY → PAGES→ ALL). By default, the pages included in the filter are: 1 (kWh+ TOT, kW), 2 (kWh- TOT, kW), 5 (VLN, VLL,
Hz), 7 (kvarh+ TOT, kvar), 8 (kvarh- TOT, kvar), 25 (L1 A, L2 A, L3 A), see "Measurement pages" on page 13.
