ASSEMBLY INSTRUCTIONS FOR JANITOR CART
#104803332_Rev2013
PARTS:
• (1) Base Assembly with
Wheels & Casters
• (2) Side Upright
• (1) Back Upright
• (1) Middle Utility Shelf
• (1) Top Utility Shelf
• (1) Handle
• (1) Trash Bag
• (10) 1" Bolt
• (3) 1-1/2" Bolt
• (2) Bolt Cap (blue)
TOOLS:
• 3/16" Hex Wrench
(included)
• Rubber Mallet
PRODUCT NUMBERS: JC1945S, JC1945L
1. Place base assembly upright on a firm
even surface.
2. Insert the short end of the two side
upright into slots on the base as shown
and tap into place with mallet.
3. Insert the short end of the back upright
into slot as shown and tap into place.
4. Slide middle utility shelf onto uprights
as shown. Choose either high or low
position and slide post on each side of
shelf into corresponding slot on each
upright. Tap into place with the mallet.
Face “V” groove
inside and down
in relation to
base.
© 2013 Carlisle FoodService Products
Oklahoma City, OK 73131
www.carlislefsp.com | 800-654-8210