Carl Valentin FLEXICODE 53, Operating Manual, Page: 89 / 120

Flexicode Maintenance and Cleaning
11.19 Operating Manual 89
9.4 Replace the Printhead
CAUTION!
The printhead can be damaged by static electricity discharges
and impacts!

Set up the device on a grounded, conductive surface.

Ground your body, e.g. by wearing a grounded wristband.

Do not touch the contacts on the plug connections.

Do not touch the printhead with hard objects or your
hands.
C D
A
E
B
Figure 19
1. Remove the cover.
2. Move the printhead unit in an appropriate service position.
3. Press the printhead support (A) slightly downwards until an Allen
key can be inserted in the screws (C).
4. Unscrew the screws (C) and remove the printhead (B) with the
printhead flat rod (E).
5. Remove connection at the rear of the printhead.
6. Remove the screws (C) and afterwards the printhead (B).
Remove the printhead