Carl Valentin COMPA II, Operating Manual

Page: 54 / 116

Function menu Compa II
54 Operating manual 03.20
Press the key to move to the next menu item.
Off: The synchronization is disabled, i.e. the measuring and label feed
have to be released manually.
Measure: After switching on the printer, the loaded label is
automatically measured.
Feed: After switching on the printer the label is synchronized to the
beginning of label. For this one or multiple labels are advanced.
Press the key to move to the next menu item.
If the print is interrupted in the label, at the printhead this could lead to
a small interruption in the printout, showing a fine white line onto the
label. To avoid this, a value for the minimum backfeed can be set (0
–
1 mm) at which the label material is moved backwards. At the next
print start the free range is overprinted. The setting of CMI length has
only an influence at the selection of backfeed mode 'optimised
backfeed'.
6.6 Network
Switch on the label printer and the display shows the main menu.
Press the key to access the function menu.
Press the key until the menu Network is displayed.
Press the key to select the menu.
For more information, please see the separate manual.
Synchronization at
print start
CMI length