Technical user manual SLC
General
www.cargofloor.com
www.cargofloor.com
Page 5
Version 01 / July 10
th
, 2017
HEALTH AND SAFETY SHORT LIST
1. During operation, the (hand)brake of the vehicle must always be applied.
2. Check surroundings, at all times, that no persons, animals or objects are in the direct vicinity of the
vehicle.
3. Caution when opening the doors. There could be backpressure from the product to the doors which
could force the doors to open themselves and injure you, also product could fall on top of you!
4. Do not stand behind the trailer or in the discharge area when the floor is operating
5. Do not make adjustments to the unloading mechanism with the floor operating
6. Do not operate system when protective covers and screens are not in place
7. Do not go underneath the trailer when floor is operating
8. Do not leave the trailer unattended while the Cargo Floor system is in operation
9. Do not hold the conduits these can could be hot
10. Disengage the trailer from the PTO hydraulic power unit before service and maintenance
11. Stay away from any oil leaks when hydraulic pressure is high
12. Turn off the PTO hydraulic power unit before moving the trailer
13. Keep clear at all times.
EMERGENCY STOP
In the event of an EMERGENCY, operation of the Cargo Floor system can be halted as follows:
By pressing the red stop button on one of the control switches;
By turning all switches to position “0”;
By putting the handle of the control valve in the middle “0” position (only B and A control);
Turning off the PTO pump/engine;
Turning off the main switch of the power supply;
Turning off the motor of the electro-hydraulic aggregate.
START UP CHECK LIST BEFORE OPERATION (UNLOADING / LOADING)
1. Check surroundings, at all times, that no persons, animals or objects are in the direct vicinity of the
vehicle.
2. Open doors first.
CAUTION when opening the doors. There could be backpressure from the product to the doors
which could force the doors to open themselves and injure you, also product could fall on top of you!
3. Check if hydraulic hoses/couplings are connected correctly and firmly (pressure and return).
4. Turn on the lights of the trailer
5. Check your type of operation: A, B or E? Make sure that all operation controls are in the non-
activated 0 position.
6. Turn on the pump
7. Determine/choose your required operation: unloading or loading. CAUTION check immediately if
your required operation is working correctly. The loading / unloading direction is determined when all
the profiles move in one direction together. (Unloading: toward the doors / loading: toward the head
board/truck.)
8. During unloading it might be necessary to move the vehicle forward to achieve a faster and cleaner
unloading.
Remarks!
Make sure that your unloading / loading spot is long/large enough to move your complete vehicle its
full length forward.
The (hand)brake of the vehicle must always be applied.
