Cargo Floor CF500 SLC, Technical User'S Manual

Page: 13 / 36

Technical user manual SLC
General
www.cargofloor.com
www.cargofloor.com Page 13
Version 01 / July 10
th
, 2017
CARGO FLOOR TECHNICAL SPECIFICATIONS
CF500
SLC
CF100
SLL
CF500
Power speed
CF
3 LP-2
(leak proof)
CF600
HDC
CF800
HD-6
Bore (mm [inch])
100 [3.9] 80 [3.15] 100 [4] 125 [4.9] 120 [4.7] 100 [3.9]
Piston rod diameter (mm [inch]) 45 [1.77] 35 [1.38] 45 [1.77] 60 [2.35] 45 [1.8] 50 [2]
Stroke (mm [inch]) 200 [8] 150 [5.9] 200 [8] 150 [5.9] 200 [8] 200 [8]
Cylinder volume ltr. [gallon] 2,82 [0.7] 1,36 [0.4] 2,82 [0.75] 3,26 [0.9] 4,2 [1.1] 5,5 [1.5]
Oil volume per cycle (ltr.
[gallon])
8,5 [2.2] 4,09 [1.1] 8,46 [2.25] 9,77 [2.6] 12,6 [3.3] 16,5 [4.4]
Pressure relief valve setting,
max. pressure (bar [psi])
225 [3,263] 175 [2,538] 225 [3,300] 150 [2,175] 205 [2973] 225 [3,300]
Strokes per minute with advised
pump capacity
13
17
21
11
8,7
6,6
Speed (mtr. / min [ft./min]) with
advised pump capacity
2,6
[8.5]
2,6
[8.5]
4,2 [13.8]
2,0
[6.6]
1,7
[5.6]
1,3
[10]
Advised pump capacity:
Flow (ltr./min [gpm]
110 [29] 70 [18.5] 180 [47.6] 130 [34] 110 [29] 110 [29]
Pressure (bar [psi])
250 [3,625] 200 [2,900] 250 [3,625] 175 [2,538] 220 [3,200] 250 [3,625]
Max. pump capacity:
Flow (ltr./min [gpm]) 130 [34.5] 80 [21] 200 [52.8] 170 [45] 190 [50]
!E-Control
130 [34.5]
130 [34.5]
Pressure (bar [psi]) 250 [3,625] 200 [2,900] 250 [3,625] 175 [2,538] 220 [3,200] 250 [3,625]
Speed at maximum
pump capacity
(mtr. / min. [ft./min]) 3,1 [10] 2,9 [9.5] 4,7 [15.4] 2,6 [8.5] 3,0 [9.8]
!E-control
2
[6.2]
1,6 [5.2]
Solenoid/coil; 24V DC only E and B control (optional available 12 V DC)
Pressure filter type; high-pressure 10 micron (part no.
7372005 )
ESTIMATED UNLOADING TABLE
Specifications for a Cargo Floor CF500 drive unit with 100 mm [3.9"] bore cylinders.
Engine
Pump output speed * Unloading time
13.6 mtr [45 ft] trailer
550 RPM/m [rpm] 60 l/m [15 g/min] 1.4 m/min [4.6 ft/min] 9-10 minutes
750 RPM/m [rpm] 80 l/m [21 g / min] 1.9 m/min [5.9 ft/min] 7-8 minutes
1000 RPM/m [rpm] 110 l/m [29 g/min] 2.6 m/min [8.5 ft/min] 5-6 minutes
These only are approximate meters per minute and should strictly be used as a reference!