Page 23
Instruction Manual F4U-1D Corsair
CARF-Models Ltd. [email protected]
Note: When you glue the flap hinges to the outer wing, (where the root hinge does not have a
wood support in the spar) please remember that the control rod will need clearance below the
20 mm tube. So you might have to cut the outer one of the front hinges short, as shown on the
photo, before you finally glue it in.
Inner and center hinge of center wing
Outer center wing hinge and both outer
wing hinges
Center hinge of center wing top view
Slide every hinge
down into the slot
until the shoulder
touches the wing
surface
cut here
Summary of Contents for F4U-1D Corsair
Page 1: ......
