Maintenance and Troubleshooting
3–10
AA2204_en | 2012-07-27
Subsystem Error Codes and Messages
Use the information in this section to interpret the codes and messages that appear on
the display screen and at the Web Portal.
DICOM (Digital Imaging and Communications in Medicine)
In response to a DICOM printer N-GET status request from a modality, a printer status
message and a printer status info message are returned to the requesting service class
user (SCU). Every error has an associated printer status info message. If more than one
error exists when a printer N-GET request is received, a status message is sent in response,
according to an established priority. The table shows the DICOM printer status and info
message.
Printer
Printer Status
Printer Status Info
Printer Status
Printer Status Info
FAILURE
ELEC DOWN
PRINTER DOWN
PROC DOWN
WARNING
BAD SUPPLY MGZ
CALIBRATION ERR
CHECK PRINTER
COVER OPEN
EMPTY MEDIASZ MEDIATP
FILM JAM
FILM TRANS ERR
PROC INIT
PRINTER INIT
PRINTER OFFLINE
Printer
Status
Display Screen
Web Portal
DICOM Status
Description
Cover is
open
Code: 701
Power symbol is
yellow
20701:
Cover Open
WARNING /
COVER OPEN
The top cover or one of
the side panels may be
off. The imager is not
ready to print.
Failed
Power symbol is
yellow
Failed
See Condition
Code
An error has occurred
that prevents printing.
Cartridge
closure is
requested
Power symbol is
green and/or
flashing
Pause symbol is on
Not Ready
Not
Applicable
The imager completes any
prints in progress before
closing the cartridge
cover.
Offline
Power symbol is
yellow
20704:
Printing
Disabled
WARNING /
PRINTER
OFFLINE
The imager has been
disabled and does not
have a network
connection.
SHORT TERM CONFIDENTIAL
