Carestream DENTAL CS 3800, User And Installation Manual

Page: 32 / 43

28 Chapter 3 Setting Up the Scanner
Using the Holder
The holder can function as a desktop holder or a wall mount holder.
Installing the Desktop Holder
To use the holder as a desktop holder, follow these steps:
1
Select a clean surface area that you can access easily.
2
Clean the surface on which you are going to fasten the holder.
3
Attach the adhesive tape to the bottom of the holder (A).
4
Remove the adhesive tape protection (B).
5
Place the taped side of the holder on the clean surface (C) and press firmly several times for
correct adherence. The maximum adherence is obtained after two hours.
Important: You must avoid all stress on the holder during the first
two hours.
Important: Adhesive tape can lose its adherence capability due to
environmental and other factors. Check the adherence regularly to
ensure that it is secure.
Important: Carestream Dental LLC is not responsible for accidents
or damage involving the scanner falling due to loosening of the
adhesive tape.