CareFusion Pyxis MedStation 4000, User Manual, Page: 57 / 246

Formulary management
Pyxis MedStation 4000 System Console User Guide 47
6. Click
Save
.
7. Click
OK
.
Enabling Scan on Load/Refill
This feature allows a facility to require scanning of a medication scancode during
the load/refill processes. This feature is configured in the formulary section. In
addition, scancode maintenance must also be performed at the console to correlate
a scancode to a specific formulary.
1. Select
System Setup > Formulary Management > Formulary
.
2. In the Formulary dialog box, highlight the medication.
3. Click
Edit
. The View/Modify Formulary dialog box appears.
4. Click the
Formulary Options
tab.
5. Select the
Scan on Load/Refill
check box.
6. Click
Save
.
7. Click
OK
.
Enabling undocumented waste
This feature allows a facility to track any and all remove transactions in which a
user removes a quantity greater than the ordered dose.
NOTE
When enabling Scan Once, you are prompted to scan the item being removed
only once. Information will be provided in the system for the one item you
scanned. Scan Once is designed to capture only one scan during medication
removal that may involve multiple dosage forms within the same pocket.