CareFusion Pyxis MedStation 4000, User Manual, Page: 56 / 246

Chapter 3
—
Setting Up the System
46 Pyxis MedStation 4000 System Console User Guide
Enabling Scan on Remove
This feature allows a facility to require scanning of a medication scancode during
the remove process. This feature is configured in the formulary section. In
addition, scancode maintenance must also be performed at the console to correlate
a scancode to a specific formulary.
1. Select
System Setup > Formulary Management > Formulary
.
2. In the Formulary dialog box, highlight the medication.
3. Click
Edit
.
The View/Modify Formulary dialog box appears.
4. Click the
Formulary Options
tab.
5. Check the
Scan on Remove
check box.
NOTE
If processing multi-doses, check the
Scan Once on Remove
box. This option
allows you to scan medications once regardless of the quantity being removed.
This makes it easier to work with multi-dose orders.
• When removing multiple instances of a formulary item, the station requires
one scan the first time the item is removed from the same pocket.
• When removing multiple instances of a formulary item in which the quantity
of items in one pocket is smaller than the quantity selected to remove, the
station requires that you scan the first item removed from each pocket from
which the item is removed.
• With Scan Once enabled, NDC values cannot be captured since each dose
is not scanned.