CareFusion Pyxis MedStation 4000 User Manual Download Page 22 | Manualshive

Page: 22 / 246

CareFusion Pyxis MedStation 4000 User Manual Download Page 22

Chapter 2

—

Console Basics

12

Pyxis MedStation 4000 System Console User Guide

Getting started

This section provides an overview of how to access the console user interface.

Navigating the standby screen

The standby screen box is the default console screen and is your entry point into
the console. After a predetermined time without keyboard activity, the console
reverts to the standby screen even if you have not logged out. However, you
should always log off when you leave the console to ensure that transactions are
not performed by other users using your logon ID.

Logging in

When no one is logged in to the console, the standby screen displays the Login,
Window, CommStatus, and Help menu options. Your system administrator
provides you with a user ID and a first-time Password.

1. In the standby screen, click

Login,

click on the screen,

or press

Enter

.

2. In the Console User Login dialog box, enter your ID and password and click

OK

.

The menu bar appears.

Logging off

Log off before stepping away from the console.

NOTE

The examples used throughout this guide show screens with full access
privileges and most station options turned on. The screens you see on your
system might vary depending on your access privileges and option settings.

NOTE

If your facility decides to use the SHA1 password encryption, do not turn on this
flag until this feature is implemented on all devices connected to the console.

NOTE

The console should not allow ID scans.

«
...
20
21
22
23
24
...
»

Summary of Contents for Pyxis MedStation 4000























































































































































































































































Reviews:

No comments