CareFusion Pyxis MedStation 4000, User Manual, Page: 106 / 246

Chapter 3
—
Setting Up the System
96 Pyxis MedStation 4000 System Console User Guide
3. To add units to the selected area, select the units from the Nursing Units list
and click
Add
.
4. To remove units to the selected area, select the units from the Area’s NUnits
list and click
Remove
.
5. Click
Save Area
.
6. To return to the standby dialog box, click
Close
.
Deleting an area
The following procedure explains how to delete an area.
1. Select
System Setup > Area Configuration > Areas
.
2. In the Area List section of the Area & Nurse Unit Maintenance dialog box,
select the applicable area and click
Delete Area
.
3. In the confirmation message, click
YES
to continue.
4. To return to the standby dialog box, click
Close
.
Deleting a nursing unit
The following procedure explains how to delete a nursing unit.
1. Select
System Setup > Area Configuration > Areas
.
2. In the Nursing Units section of the Area & Nurse Unit Maintenance dialog
box, select the applicable unit and click
Delete Unit
.
3. In the confirmation message, click
YES
.
4. To return to the standby dialog box, click
Close
.