CareFusion Pyxis MedStation 4000, User Manual, Page: 105 / 246

Areas
Pyxis MedStation 4000 System Console User Guide 95
Adding an area
The following procedure explains how to add an area.
1. Select
System Setup > Area Configuration > Areas
.
2. In the Area & Nurse Unit Maintenance dialog box, click
Add Area
.
3. In the Add Area dialog box, enter a name for the area (up to 10 characters)
and click
OK
.
The new area appears in the Area List section of the dialog box. The system
highlights it because you must assign nursing units to it before you can save it.
4. In the
Area List
section of the Area and Nurse Unit Maintenance dialog box,
select the area that you created.
5. In the
Nursing Units
list, select the units that you want to assign to the selected
area and click
Add
.
The selected unit is listed in the Area’s NUnits section of the dialog box.
6. Click
Save Area
.
7. To return to the standby dialog box, click
Close
.
Adding or removing a nursing unit to or from an area
You can assign up to six nursing units to an area.
1. Select
System Setup > Area Configuration > Areas
.
2. In the
Area List
section of the Area & Nurse Unit Maintenance dialog box,
select the applicable area.
The nursing units currently associated with the area are shown in the Area’s
NUnits list.
NOTE
Clearing an existing value sets the value back to one year.