TO RAISE THE TABLE
Lift the table until the desired height is reached;
With hand squeezing the lever and table top
Lift the table until the desired height is reached;
it will automatically lock in position.
TO LOWER THE TABLE
Squeeze lever handle and table top together
Plastic lever
(with one hand) and apply pressure down above
the column until the table top lowers to the
desired position. Release the lever and the table
top is locked.
NOTES
NOTES
Occasional application of light oil lubrication
between the inner and outer columns will
help your table operating smoothly.
The table top will rotate a full 360°around its base
to be used as a side table or lap tray as needed.
THIS TABLE IS DESIGNED TO BE
USED WITH HEAVIER RECLINER
CHAIRS SO INCORRECT USE OR
UNIVERSAL ADJUSTABLE TABLE
CHAIRS SO INCORRECT USE OR
POSITIONING MAY RESULT IN
CareCo (UK) Ltd
THE TABLE TIPPING OVER.
Hubert Road
(REF. ASSEMBLY STEP 1)
Brentwood
Essex
CAUTION--SPRING LOADED ASSEMBLY
CM14 4JE
Do not remove the black shipping screw
before completing assembly steps 1-4.
Tel: 0800 111 4774
Removing the shipping screw before this
Removing the shipping screw before this
can result in personal injury and spring
damage.
www:careco.co.uk
Product is NOT to be used to assist in lifting
or hold more than 25lbs (11kgs).
Email: [email protected]
