Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 296 / 378

5-10
Programming
Alaris
®
System Directions for Use
EtCO
2
Module Section
Changing Waveform Height
1. Press Waveform height soft key.
A
Waveform height: 80 mmHg
Waveform time scale: 5 sec
Limit Mode: Adult
Channel Options
>Select an Option or
EXIT
EXIT
2. To change Waveform Height , select applicable range
limit.
•
60
mmHg: Displays a waveform for
E
t
CO
2
values
within
0 – 60
mmHg range. If
E
t
CO
2
value exceeds that
range, Waveform Out of Range; Adjust Scaling
message displays until waveform falls back into range
or
0 – 99
mmHg option is selected.
•
99
mmHg: Displays a waveform for full
E
t
CO
2
value
range,
0 – 99
mmHg.
3. To return to
ETCO2
Main display, press
EXIT
soft key.
A A
60 mmHg
Waveform Height
EXIT
>Select an Option or
EXIT
99 mmHg
Channel Options (Continued)
2. To change Limit Mode Setup , press applicable soft key.
OR
To leave Limit Mode Setup unchanged and return to
ETCO2
Main display, press
EXIT
soft key.
A
A
Adult
Neonatal
Limit Mode Setup
EXIT
>Select an Option or
EXIT
Changing Limit Mode (Continued)