Cardinal Health Alaris 8000 Series, Directions For Use Manual

Page: 247 / 378

Attaching Cable and Sensor
Getting Started
4-3 Alaris
®
System Directions for Use
SpO
2
Modules Section
1. Attach applicable patient cable to
S
p
O
2
Module. Ensure
secure connection and patient cable is not twisted, sliced
or frayed.
2. Attach applicable sensor to patient cable. Refer to
sensor’s directions for use for detailed instructions.
8210 Series:
Use only approved O
XI
M
AX
®
sensors, and
DOC–10
and
OC–3
pulse oximetry cables .
8220 Series:
Use only approved Masimo
®
sensors and patient cables .
Use of sensors, transducers, cables
and accessories other than those
specified may cause improper
S
p
O
2
Module performance resulting in
inaccurate readings, increased
emission and/or decreased
immunity, and degraded
electromagnetic compatibility
performance of the
S
p
O
2
Module.
For a list of compatible sensors and
cables, reference the Sensor and
Cable Compatibility Card (provided
separately).
WARNING
CHANNEL
SELECT
CHANNEL
OFF
MONITOR
Patient Cable
3. Attach sensor to patient. Refer to sensor’s directions for
use for detailed instructions.
Attach sensor
here.
Attach patient
cable here.