manualshive.com logo in svg

Cardinal Components ElectroSet CB-035, Manual, Page: 1 / 10

Share
Download
Cardinal Components ElectroSet CB-035 Manual Download Page 1

1

  

of

  

10

rev.

 

1.01

ElectroSet™ 

7 Segment LED 

Module

 CB-035

Overview

The CB-035 device is an, 8-digit 7-segment display.

Each segment can be individually addressed and updated separately using a 2 wire 

 

I²C

  

interface. Only one external resistor (RSET) is required to set the current. LED brightness 
can be controlled by analog or digital means.

The device include an integrated BCD code-B/HEX decoder, multiplex scan circuitry, 
segment and display drivers, and a 64-bit memory.  Internal memory stores the shift 
register settings, eliminating the need for continuous device reprogramming.

Features

• 7 Segment Display
• 8 Digit LED Module
• Up to 1MHZ I²C Compatible

Interface

• Individual LED Segment Control
• Hexadecimal for 7-Segment Displays
• 200 nA Low-Power Shutdown

Current (type; data retained)

• Digital and Analog Brightness

Control

• Display Blanked on Power-Up

Basic Parameters

•

  

Single Voltage Supply:3.3V

• Communication: I²C 

compatible 

connection

   

• Default Address:0x00

145

 

Rt.

 

46

 

West

 

Wayne,

 

NJ

 

07470

 

Tel:

(973) 689-9960

E

‐

mail:

 

sales@electro

‐

set.net

Web:

 

www.Electro

‐

set.net

Summary of Contents for ElectroSet CB-035











Reviews:

No comments