18
7
To change the status of the lock press the button and the
LED will change to either red or green as the button is depressed.
8
To save the child lock settings press and release the button.
9
If the lock is disabled the LED will flash green (can open door).
10
If the lock is enabled the LED will shine constant green (cannot
open door).
NOTE:
Whether the child lock is enabled or disabled,
Autoglide can still be operated using the handset.
SAFETY NOTE:
If there is a chance that children may play in the entry
of the garage then ensure the child lock is ENABLED so that the door
CANNOT be operated from the
button
Your Autoglide control system contains advanced electronics that monitor
power over the full OPEN/CLOSE cycle and computes a SENSITIVITY
FACTOR to ensure user safety.
To check the operation of this, signal the door to close and when it is
halfway down obstruct the door at the bottom edge using both hands.
Using only light to medium force the door should stop and then
reverse to the fully open position.
If excessively heavy force (or extremely light force) is required to stop
the door then RE-CONFIGURE the POWER and SENSITIVITY SET UP as
instructed in Section 6A.
7
Safety sensitivity check