14
Autoglide can be quickly and easily set-up by the use of three buttons,
each of which has a corresponding status LED.
6
Configuring your Autoglide operator
config – Configures
the power /sensitivity
settings of the motor
and configures the
child lock.
up/down – Press this button
to open/close the door
(depending on child lock
config). In set-up mode this
button selects the enable
/disable of the child lock.
Continuous
RED power
on to unit.
ORANGE
when remote
control signal
is received.
IN LEARN MODE
See relevant section for description.
IN STANDBY MODE (awaiting command)
Continuous GREEN – child lock enabled
Flash GREEN – child lock disabled
IN RUN MODE
Continuous GREEN – motor running, door in motion
Flash RED – obstruction or other problem
handset –
Configures the
remote control
handset(s).
LED
BUTTONS
•
Figure 24