13
5
Engaging the motor
10 mm
diameter
hole
•
Figure 21
1
Open door to identify position of 10mm
diameter round hole in Dymetrol tape, this
is marked with silver paint (Figure 21).
Move the door so as to align the red
manual release lever with the 10mm hole.
Re-engage the drive pin in the 10mm
diameter hole in the Dymetrol tape by
operating the manual lever (see Figure 7).
N.B
. To ensure drive pin is correctly
engaged try to move door up or down
manually, it should not be possible.
2
Move top (open) limit switch to a position
5mm from top of track (Figure 22).
3
Move bottom (close) limit switch to a position
15mm above motor (Figure 23).
75 mm
•
Figure 22
125 mm
•
Figure 23
5mm
15mm