12
7
Route latch release cable through cable
adjuster and fix to door as shown (Figure 18)
using cable ties supplied. Aim for smooth
gentle curves on the cable run, avoid tight
bends and kinks. N.B. Cut sheath to length
if necessary to achieve best results.
8
Slide cable clamp over cable, pass cable
through bottom hook of latch lever
(Figure 19) and return cable through cable
clamp. Tighten using M4
×
8mm Hexagon
head screw supplied to give 6mm (
1
/
4
")
engagement at both latches (Figure 15).
9
Force latch cam to the right across slot
using a screw driver (Figure 20) to check
operation of latches. Re-adjust latch
settings if necessary.
Stiffener configuration may very
•
Figure 18
To side
latch
To top
latch
Latch
lever
To cable adjuster
Cable
clamp
M4 x 8mm
Hex head screw
•
Figure 19
Cam pin
Latch
cable
Drive
carriage
Move
latch
across slot
Latch
cam
•
Figure 20