14
docs.carbide3d.com
Step 7: Enable & Configure the BitSetter HDM
Setting Up the BitSetter HDM
Home the Machine
First, connect to and home the machine:
1.
Power up your computer.
2.
Connect the USB cable to the computer.
3.
Start Carbide Motion.
4.
Turn on the electronics cabinet power switch.
5.
Press the Machine Power button on the front-right endplate to enable power to the machine.
6.
In Carbide Motion, click the Connect to Cutter button.
7.
Click the Initialize Machine button.
PRO TIP:
The machine can be re-homed later on in a project (see
Fig. 3
). To do so:
1. Click
MDI
in the top menu bar.
2. Enter
$H
in the command line and click the
Send button
.
Figure 3
Summary of Contents for Shapeoko HDM
Page 1: ...Shapeoko GETTING STARTED GUIDE HDM...
Page 2: ......
