Carbide 3D SHAPEOKO 3, Assembly Manual

Page: 5 / 31

6 docs.carbide3d.com support@carbide3d.com 7
Shapeoko 3 Final Assembly Box
Open the box labeled Shapeoko 3 Final Assembly and inspect its contents. Many parts are packaged in
small plastic bags, and smaller bags may be packed into larger bags This box contains the items listed in the
table on the next page and shown in
Figure 1‑4 .
Shapeoko 3 Final Assembly box contents; see Figure 1‑4 :
Item Description Qty
A Baseframe Adjustable Leveling Feet 4
B Baseframe Hardware: M5 × 25mm Button Head Cap Screws (+ 6 Extra) 18
C Router Mount 1
D Router Mount Adapter Ring 1
E
Router Mount Hardware: M5 × 55mm Socket Head Cap Screws (2) and M5 × 16mm
Button Head Cap Screws (2)
4
F Loctite 242 Threadlocker (non-permanent) 1
G Extrusion Rail Hardware: M6 × 12mm Button Head Cap Screws 24
H Belt Clips (6) and Belt Hardware: M5 × 10mm Socket Head Cap Screws (6) 12
I Toothed Belt 3
J
Proximity Switch Plates (2), M3 × 18mm Socket Head Cap Screws (4) and M5 × 8mm
Socket Head Cap Screws (4), 30mm Male-to-Female Standoffs (2)
12
K Proximity Switches 2
L
Carbide Motion Board and Enclosure with Mounting Hardware (inside): M6 × 8mm
Button Head Cap Screw (2)
3
M PCB Riser Board 1
N
Cable Tie Mounts (4 + 1 Extra) and M4 × 6mm Socket Head Cap Screws (4 + 1 Extra),
Cable Ties (25)
35
O Power Cord 1
P Power Supply 1
Q USB Cable 1
R Large Zip Tie 2
S Permanent Marker 1
T Shapeoko Build Plate 1
U #201 ¼-inch Square End Mill Cutter 1
V Tool Kit: 5, 4, 3, 2.5, 2, and 1.5mm Hex Keys*; 10 and 8mm Wrenches 8
*The 5mm hex key is provided in case you need to adjust the stepper motor idlers; the 1.5mm hex key is provided in case you
need to adjust the motor pulley set screws.
Figure 1-4