9. MAINTENANCE
Caution! Before proceeding with any maintenance operations, switch off
the engine/motor and make sure the machine cannot be started up. Safety
gloves must be worn during maintenance operations.
8.1 Cutter tools replacement
•
Unscrew the screws of the blocks holder tools.
•
Remove the tools and replace them, take care to replace the in the
same position previously (fig. 10-13).
•
Adjust the position of the tools with the plate calibration (fig. 11-12).
•
Screw the screws of the blocks holder tools.
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Adjustment
plate
Tools
disposition
15,9 mm
Cutter wheel
Tool
Position of
all tools
Regulation with
adjustment plate
Adjustment
plate
Summary of Contents for 20 SP
Page 10: ...Fig 4 Fig 5 Fig 6 OFF ON...
