Installation
2
Place the
mounting plate
at the desired installation position�
3
Mark the two screw points�
4
Pre-drill the two holes for the screws�
5
Place the
mounting plate
in the same position again and screw it down tightly� Make sure
to use suitable screws to avoid damage to the vehicle and device�
6
Place the device back on the
mounting plate
�
Electrical installation
CAUTION
•
Always disconnect the negative terminal from the battery before working
on the vehicle electronics to avoid damage to the electrical system�
•
In the case of vehicles with an auxiliary battery, also disconnect the
auxiliary battery�
•
Insufficiently insulated or improperly connected cables can lead to
malfunctions and short circuits in the vehicle‘s electrical system�
1
Disconnect the battery according to the manufacturer‘s specifications�
2
Connect the ground wire (black) to a suitable ground point in the vehicle� Disconnect the
battery according to the manufacturer‘s specifications�
3
Connect the +12V wire (red) to the power supply with a wire that carries continuous positive�
4
Insulate all connections, as well as unused wires and terminals, and then reconnect the
battery according to the manufacturer‘s specifications�
English
