CAR-TECH BOSCH EDC17C59 Quick Start Manual Download Page 1

Page: 1 / 4

MANUAL FOR USING BOSCH EDC17C59 BOOT ADAPTER FOR MAGPRO

Description:

It can be used for read pass and flash ECU Bosch EDC17C59 in boot mode. Switching mode of reading
the password and flash ECU.

No more solder and connect power cable, need connect only this adapter.

Specification:

- Supports MagPro2 X17 and T-boot programmer with switching mode for password reading

- 12V connector and cable for led lights

- Cable for connecting adapter to Breakbox v2 and Unlock Plugin

- For classic BDM frame - 6cm wide or for 4 cm frame

- Supports stable and precise connection - with 3 mm PCB there is no bending

- Supports stable and reliable connection with precise golden pogopins

Summary of Contents for BOSCH EDC17C59

Page 1: ...able need connect only this adapter Specification Supports MagPro2 X17 and T boot programmer with switching mode for password reading 12V connector and cable for led lights Cable for connecting adapte...

Page 2: ...ng E connect the cable to the power adapter You can use power adapter from MagPro 12 14V Place the adapter into the BDM frame retaining bracket and tighten the screws Connect the adapter to the MagPro...

Page 3: ...e in their designated position A detailed photo showing the location of the connections can be found further You can use nippers for fast installation of pins Password reading For password reading swi...

Page 4: ...erwards you can make reading and writing After each disconnection of ECU you need to unlock it again We test each adapter on real ECU before sending Copyright by www cartech pro This product should be...