REV 1.1 07/06/2018
www.car-solutions.com [email protected]
Place various obstacles on specified distances behind
your car and make required adjustments.
Note!
In case rear view camera was installed
near/above the license plate or into the license plate
backlight, the rear bumper will not be visible on the
camera image.
Checking Camera Activation Signal
If your car radio was not installed by the manufacturer, the backup activation signal may be absent from the
wires connected to the car radio. For cases like this there’s a grey
REV wire
in our cable. +12 V should be supplied to this
wire when the car is switched to reverse (may be taken from the rear lamp). Also, you may check the connection of this
activation signal in the diagnostics menu.
Enter the diagnostics menu using the method described
at the beginning of this manual. Choose the
Vehicle
Signals
option in the first window.
Note!
Depending on your car radio model and its
software version, some menu options may be placed
and/or called differently.
Check the
Reverse
signal in the dialog window that
appears.
ON
message should appear on the screen
when you switch to reverse, and disappear when you
switch back. If this does not happen (there’s no
message or it does not react), use the grey
REV
wire of
our cable.
Press the
BACK
button in the top right corner to exit
the diagnostics menu.
Car-Solutions.com
