45929, EN - rev. 6, 2019-03
18
4 Operation
4.1
PointX measuring arm
Before you begin using PointX measuring arm and Vision2 PointX, be sure
to read the instructions in this Instruction Manual and that you understand
them. The equipment is inspected and checked prior to leaving the factory
to guarantee consistent quality and maximum reliability.
IMPORTANT
: It is the responsibility of the owner (user) to ensure
that the equipment has been installed as specified in the instructions
provided. It is also the owner’s responsibility to ensure that the
equipment is inspected in accordance with applicable regulations
before it is used.
IMPORTANT
! Keep the measuring tubes, the measuring adapters
and the measuring tube attachments clean. These are precision parts
which contribute to accurate measurement results.
IMPORTANT
! Lock the measuring tubes and the measuring
adapters with the proper locking devices. Accuracy will suffer if
these items are not properly secured.
