45929, EN - rev. 6, 2019-03
16
3 Installation
3.1
PointX measuring arm
Insert 2 AA batteries in the battery compartment on the back of the
measuring head, see picture below. Car-O-Liner recommends rechargeable
batteries. Battery cover latch is released by hand. The PointX measuring
arm is now ready to use.
Figure 3.1 Insert the batteries.
IMPORTANT
: Batteries must be installed according to the diagram
printed to the inside of the battery compartment to ensure correct
terminal polarity. Use only AA/LR6 batteries. Other batteries may
cause equipment to malfunction or damage the electronic circuit.
