45929, EN - rev. 6, 2019-03
124
14.2 PointX measuring arm
Supply power
2 x AA/LR6 batteries. Rechargeable or standard.
Display resolution
+/- 1 mm
Measurement tolerances
Typical tolerance
Maximum tolerance
Length
+/- 1mm
+/- 2mm
Height
+/- 1mm/meter
+/- 2mm/meter
Calibration
Individual calibration with full traceability to
international/national standards of length. Certificate of
calibration is included, see enclosure.
Measuring range
295 - 2090 mm, P2P 300-3300 mm
Working time
8 hours of typical use
Weight measuring arm
0.9 kg including batteries
Operating temperature
-10
o
C to 40
o
C
Communication between the
measuring arm and the PC
Bluetooth, Class 1, 100 mW, range up to 100 m
Frequencies for communication
between the measuring arm
and the PC
2.4 GHz
Hardware features
- Distance and height measuring in lower body
- Point to point(P2P) measuring in upper body
- Wireless transfer to PC of registered measurements
- Colour display
Quality certificate,
Car-O-Liner Group AB
ISO9001, ISO14001
NOTE!
PointX is an individually calibrated measuring device meant for
estimating purposes. Mechanical tolerances as offsets and angular
displacements of the device are compensated for in the calibration process
by the software.
Measured values may vary with/depend on:
Length and Height:
- Tensions/elastic displacements that may build up when using long
measurement adapters
- The small gap-and-play that is present in the telescopic arm
- Temperature Height
- Accuracy of centering will highly affect calculated height values and
differences from DataSheet height values.
