CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 39 / 128

TM
Operation
Settings Menu Information
Operator Menu Descriptions
Counters Screen
Line Title Line
Number
Description
Hour Meter 1
The hour meter shows the accumulated hours. The hour meter starts when at least one
nozzle is on.
Controller Area 2
The controller area counter counts the area applied per section.
Actual Area 3
The actual area counter counts the area applied per nozzle. The controller area counter
minus the actual area counter is the additional area an operator can apply per tank load
from the individual nozzle control.
Controller Volume 4
The controller volume counter value should match the values from the rate controller.
Resetting the controller volume counter also resets the actual volume counter. Make sure
to reset the rate controller at the same time. The controller volume counter shows the
flow value per section.
Actual Volume 5
The actual volume value should match the tank volume. The difference between the
controller volume counter and actual volume counter is the product saved using overlap
control. The actual volume counter shows the flow value per nozzle. The controller
volume counter minus the actual volume counter is the total savings in product applied
from the individual nozzle control.
Volume/Min 6
The volume per minute value should match the rate controller flow display.
Flowmeter Frequency 7
The flowmeter frequency shows the Hz value the flowmeter is operating at.
©
2021 Capstan Ag Systems, Inc.
39
PinPoint
™
III ENVELOP