CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 27 / 128

TM
Initial System Setup
Initial Setup of System Settings
Change the Boom and Nozzle Settings
1.
> >
2. Change any of the values as needed.
For machine specific settings, go to PinPoint
™
III Envelop website at www.capstanag.com/
pinpoint-iii-envelop.
For setting definitions, go to Boom/Nozzle Settings Menu Descriptions .
3.
> >
Figure 16:
4.
On the Nozzle Setup screen, select the (1) to go to the right most nozzle.
5. Make sure that the yellow arrow (2) is highlighting the correct nozzle.
6. To make sure that the correct valve is highlighted, select the box next to (3) Test Valve.
With an X in the box, the valve will pulse. Remove the X to stop the valve.
7. Select the box (4) next to Soft Boom to change the boom layout as desired.
8.
Select the (5) to go the previous channel.
9. If necessary, change the valve size (6) or tip size (7).
a) Select the box next to the text and enter the desired value.
b) If the value will be the same for all valves or tips, select D (8) to change all nozzles.
10. From this screen, you can also change the profile names.
For more information, see Change a Profile Name .
©
2021 Capstan Ag Systems, Inc.
27
PinPoint
™
III ENVELOP