CapstanAG PinPoint III ENVELOP, Operator'S Manual

Page: 12 / 128

TM
Introduction
Virtual Terminal Display
This system can be used with most touch-screen virtual terminal (VT) displays. The VT display
interacts with the GPS and electronic control devices centralizing the ability to communicate, record,
store, and show data.
Note: Each VT display is different, and the system screens may be different from what is shown in
this manual.
How to Find the Software Version Information
The system must be installed and connected to the virtual terminal in the cab before you can find the
CapstanAG icon on the display.
1. Select the CapstanAG icon on your virtual terminal (VT) display.
Note: Each VT display is different, and the system screens may be different from what is shown
in this manual.
2.
> > >
Figure 2:
3. On the screen, select the desired type of software information you want to see from the list (1).
4. Make sure to write down the current information in the Service Contact Information on the
inside cover of this manual.
5. When you are done, select the Exit (2) icon.
©
2021 Capstan Ag Systems, Inc.
12
PinPoint
™
III ENVELOP