-
–
The special mains cable and plug assembly must only
be replaced with a genuine part by the
manufacturer or his service agents in order to avoid
a hazard.
- It is important to clean fluff from the window of
the dryer and around the door seal after each
drying cycle. Failure to do so could result in water
leaking.
WARNING
:
If you need to stop the tumble dryer
before the end of a drying cycle, ensure that the load
and appliance are cooled by utilizing the cooldown
period denoted on the control panel. Once the load is
removed, all items need to be quickly spread out so
that any residual heat is dissipated.
Remove all objects from pockets such as lighters
and
matches.
DO NOT
use a two-way adaptor, or extension lead.
The dryer must be connected to its own socket.
DO NOT
block the air inlets at the base and side of
your dryer.
DO NOT
allow fluff to accumulate around the
tumble
dryer. Risk of fire
DO NOT
exceed the recommended maximum load.
DO NOT
dry unwashed items in the tumble dryer
DO NOT
place articles in the dryer if anything other
than a water solution has been used in the cleaning
process.
