43
EN
Key functions
RECOVERY
• Press this button to test the pulse for 60 seconds.
The computer must have a pulse input signal.
RESET
• Press the button to reset the preset value during the
parameter setting mode, and press it again to reset
the program selection.
• Press to return to standby mode during stop.
• Press and hold for 2 seconds to reset the computer.
START/STOP
• Start and stop training.
ENTER
•
Confirm the program selection.
•
Confirm the parameter setting and move to the next
parameter setting.
• Press the button to change the function value display
during training.
[>]
• Increase the setting parameter
• Select program QUICK START, STANDARD, TARGET
SINGLE, TARGET INTERVAL, CUSTOM, RACE.
[<]
• Decrease the setting parameter.
• Select program QUICK START, STANDARD, TARGET
SINGLE, TARGET INTERVAL, CUSTOM, RACE.
Note
: Press the arrow keys to display the function value in the large center
display window.
