Canyon Mountain bike, Manual

Page: 51 / 56

98 99 SERVICE AND MAINTENANCE SCHEDULE
SERVICE AND MAINTENANCE SCHEDULE
After the bedding-in period you need to have your
bike serviced by an expert at regular intervals. The
intervals given in the schedule below are supposed
to be guidelines for cyclists who cycle around 750 to
1,500 kilometres or 460 to 930 miles a year (around
Component What to do Before every Monthly Annually Other
ride intervals
Lighting Check •
Tyre equipment Check pressure •
Tyre equipment Check tread and side walls •
Brakes (disc) Check wear of brake pads •
Brake cables/lines Visual inspection x
Rear shock Service x
Suspension fork Check bolts x
Suspension fork Change oil, service x
Fork (aluminium Check x
and carbon) At least
every
2 years
Replace x
after fall or
after 3 years
Bottom bracket Check bearing play x
Bottom bracket Regrease x
Chain Check and/or lubricate •
Chain Check and/or replace x
After
750 km
(460 miles)
Crank Check and/or retighten x
Jobs marked “•” you should be able to do yourself, provided you have a certain degree of manual skill, a little experience
and suitable tools, this including e.g. a torque wrench. If you come across any defects, take appropriate measures without
delay. If you have any questions, please call our service hotline at +44 (0) 20 8501 2582.
Jobs marked “x” should be left to an experienced and skilled bicycle expert (e.g. in an authorized, specialist bicycle
workshop). Feel free to call our service hotline at +44 (0) 20 8501 2582.
50 to 100 hours). If your Canyon does harder service,
either because your mileage is consistently greater or
because you ride a great deal on poor road surfaces,
it will require correspondingly shorter service inter-
vals.
Component What to do Before every Monthly Annually Other
ride intervals
Coating Polish •
At least
every
6 months
Wheels/ Check wheel trueness and tension •
spokes
Wheels/
True and/or retrue x
spokes If necessary
Handlebar and stem Check x
carbon and At least
aluminium every
2 years
Replace x
after fall or
after 3 years
Headset Check bearing play •
Headset Regrease x
Metal Polish (except for rotors) •
surfaces At least
every
6 months
Hubs Check bearing play •
Hubs Regrease x
Pedals Check bearing play x
Pedals Clean locking mechanism •
Rear derailleur/ Clean, grease •
Front derailleur
Quick-release Check seat •
Bolts and nuts Check and/or retighten x
Valves Check seat •
Stem/ Dismount and regrease or x
seat post reapply carbon assembly paste
(Caution: Do not grease carbon parts)
Gear/ brakes cables Remove and grease x
Jobs marked “•” you should be able to do yourself, provided you have a certain degree of manual skill, a little experience
and suitable tools, this including e.g. a torque wrench. If you come across any defects, take appropriate measures without
delay. If you have any questions, please call our service hotline at +44 (0) 20 8501 2582.
Jobs marked “x” should be left to an experienced and skilled bicycle expert (e.g. in an authorized, specialist bicycle
workshop). Feel free to call our service hotline at +44 (0) 20 8501 2582.
SERVICE AND MAINTENANCE SCHEDULE