Controls and Components
-10-
2
1 Main Switch . . . . . . . . . . . .
Main switch is used to start or stop engine.
2 Throttle Lever . . . . . . . . . .
Throttle lever is used to control engine speed.
3 Choke Knob . . . . . . . . . . . .
Pulling choke knob closes choke valve to help start engine
in cold weather. Push knob back to open choke valve once
engine starts.
4 Drive Lever . . . . . . . . . . . .
Drive lever is used to control the traveling direction and
speed of machine. Machine moves forward when lever is
tilted forward and backward when lever is tilted backward.
Angle of drive lever determines the speed.
5 Brake Pedal . . . . . . . . . . . .
Brake pedal is used to stop machine. When brake pedal
is depressed, drive lever returns to neutral position and
brake is engaged.
6 Parking Brake Lock . . . . .
Parking brake lock lever is used when parking machine
securely. Pulling parking lock lever while brake pedal is
depressed locks brake pedal.
7 Cutting Height Adjust . . . .
Cutting height adjust lever is used to adjust the cutting
height. There are 5 steps on CM141 and any height
between 0 and 80mm without steps on CM142.
8 Cutting Rotary Clutch . . . .
Cutting rotary clutch lever is used to start or stop rotating
cutting rotary.
9 Fuel Gauge . . . . . . . . . . . . .
Fuel gauge indicates the amount of fuel in fuel tank.
10 Differential Lock Lever . . .
Differential lock lever is used to lock differential when rear
wheels slip. Tilting differential lock lever to [ON] position
locks differential.
(Diff. Lock Model)
Lever
Lever
Lever
